HOW DOES A HYDROPAD™ WORK
It’s simple! As you wash vehicles or equipment, dirt, dirty water, soap and oils fall to the solid top surface of the Hydropad. Everything that falls onto the Hydropad first flows into channels just below the standing area. These channels then take fluids and debris into a side gutter.
Because , dirt, dirty water, soap and oils flow off the Hydropad via channels, this provides a much safer non skid walking surface than any solid flat surface could. The Hydropad solid top is coated with an abrasive non skid surface.
There are many gutter configurations designed to assist in the removal of solids that have reached the gutter. These range from manual removal to fully automatic.
• Hand shovel gutters
• Gutter flushing into drive in clean out trays
• Drag conveyors in the gutter
A lot of people these days are thinking more outside the box when it comes to the environment. People want to do little to no damage from construction work to even everyday use, and here at DWD we do exactly that. With the hydro pad we can prevent putting concrete pads down whether its onsite at the depot or making construction work at a new job site a lot easier. The hydro pad is all you need to go from one large job site to the next all while keeping machinery clean and the environment green.
WHY HYDROPADS™ VERSUS CONCRETE CONSTRUCTION A WASH PAD THAT CAN BE PLACED ON ANY COMPACTED SURFACE
IN MOST CASES:
Replaces the need for a cement wash pad
Won’t crack like a cement wash pad
Safer than a cement wash pad. Oils and solid contaminants flow from the work area.
Can handle the weight of an Ultra Class machine
Ships in a container, Transports on a flatbed
Manufactured under strict tolerances and shipped to the jobsite to be assembled. Bolt together
Sustainable: Re-locatable in the event mining operations move or mine site is depleted. No monument is left behind.
The next best thing bout the Hydro pad is that no job will be too big or too small.
The Hydrosite Enclosure is a portable, transportable, insulated, Environmentally Controlled Equipment Enclosure specially designed to contain, support and protect equipment used for high‐pressure hot water/cold water decontamination, wastewater pre‐treatment, wastewater filtration/polishing, associated equipment, and commodities.
HYDROSITE PORTABLE EQUIPMENT ENCLOSURE
• Equipment mounted at factory
• Wired complete
• Plumbed complete
• Factory installed and tested
• Installation is, Place on level surface, Supply Power and Water to the Utility Hub on the Outside.
• No construction. Replaces the need for a brick and mortar equipment room
• No monument left behind when mine site is depleted.
SOLIDS REMOVAL SYSTEM
DRAG CONVEYOR IN THE SIDE GUTTER
A COMPLETE ABOVE GROUND COLLECTION AND SOLIDS REMOVAL SYSTEM